JM744X/JM644X quick open mud valve adopts electric or manual two-position four-way reversing control valve to realize rapid mud lingering. JM744X/JM644X quick open mud valve will replace the piston, has no movement friction, and is more suitable for particle media such as mud, which greatly improves the service life of the valve.
Main structure size of JM744X/JM644X quick open Mud Valve
The main technical parameters of JM744X/JM644X quick open mud valve
Nominal pressure: 1.0/1.6MPa
Applicable medium: water, sewage, etc.
Working temperature: 0-80℃
Material of main parts
Body/bonnet: ductile iron
Valve disc: ductile iron/bronze
Stem: stainless steel
Diaphragm: nylon reinforced rubber
JM744X diaphragm hydraulic and pneumatic quick-opening sludge discharge valve is an angular cut-off valve with a hydraulic or pneumatic source as an angular actuator. It is usually installed in a row on the outer side wall of the bottom of the sedimentation tank to drain the bottom of the tank. Silt and dirt. The valve is divided into two chambers by nylon reinforced rubber, connected to the hydraulic source and the pneumatic source, and adopts an electric or manual two-position four-way reversing Control Valve to achieve rapid mud flow. The valve will replace the piston, has no movement friction, and is more suitable for particle media such as mud, which greatly improves the service life of the valve.
1. If the customer has special requirements for the product, the following instructions must be provided in the order contract:
(a).Structure length; (b) Connection Type; (c) Nominal diameter;
(d) Product use medium and temperature and pressure range;
(e) Test, inspection standards and other requirements.
2. Our factory can assemble various driving devices according to customer requirements.
3. If the customer needs to customize a special valve, the meaning and requirements of the model should be correctly explained, and the contract should be signed under the conditions that the supplier and the buyer understand the same.
4. For futures and order customers, please call us and tell us the required valve model, specification, quantity, delivery time and location in detail. And prepay 50% of the total contract amount for the preparation of production materials.
QQ客服 