100S Angle type mud valve is a valve used to adjust the direction of water supply in a water supply system where fire water and domestic water are connected in parallel. In the event of a fire, a large amount of water is needed for fire fighting, and the The 100S angle sludge valve immediately cuts off the domestic water to ensure sufficient water for fire fighting;
JM742X Diaphragm bottom mud unloading valve is also called the cover valve, which is often used to discharge sludge at the bottom of the sedimentation tank of urban water plants and sewage treatment plants. The applicable medium of the sludge valve is raw sewage. The temperature of the medium should generally be less than 50℃, and JM742X Diaphragm bottom mud unloading valve is working water depth should be less than 10 meters.
Pneumatic angle type mud valve is a kind of angle cut-off valve with hydraulic source or pneumatic source as actuator. J644/744 Pneumatic mud drain valve usually installed in rows on the outer side wall of the bottom of the sedimentation tank to remove the sediment and dirt at the bottom of the tank.
JM744X/JM644X quick open mud valve adopts electric or manual two-position four-way reversing control valve to realize rapid mud lingering. JM744X/JM644X quick open mud valve will replace the piston, has no movement friction, and is more suitable for particle media such as mud, which greatly improves the service life of the valve.
QQ客服 