The cf type single-flange force transmission expansion joint is composed of loose sleeve expansion joints, short pipe flanges, force transmission screws and other components, which are connected by full bolts to make it into a whole with a certain amount of adjustment.
The main structure size of CF single flange type force transmission expansion JOINT unit:mm
The main technical parameters of CF single flange type power transmission expansion joint
Design standard: GB/T12465-2007;
Flange standard: GB/T17241 equivalent (EN1092);
Working pressure: 0.6MPa/1.0MPa/1.6MPA
Applicable medium: various water quality or other oil, air, gas and other media
Applicable temperature: EPDM 0-80℃
Material of main parts of CF single-flange power transmission expansion joint
Valve body; ductile iron
Telescopic tube: ductile iron
Gland: Nodular cast iron
Sealing ring: NBR/EPDM
Fastening bolt: stainless steel
The cf type single-flange force transmission expansion joint is composed of loose sleeve expansion joints, short pipe flanges, force transmission screws and other components. It is a new product for connecting pumps, valves and other equipment with pipelines. They are connected by full bolts to make It becomes a whole and has a certain amount of adjustment. The cf-type single-flange force transmission expansion joint is mainly used for the connection between the pump, the valve and the pipeline. It has a certain multi-directional displacement effect in the pipeline operation, which can relieve the blind plate thrust in the pipeline operation and exert a certain effect on the pipeline. The protection function, especially the convenience provided for the installation and maintenance of the pipeline.
1. If the customer has special requirements for the product, the following instructions must be provided in the order contract:
(a).Structure length; (b) Connection Type; (c) Nominal diameter;
(d) Product use medium and temperature and pressure range;
(e) Test, inspection standards and other requirements.
2. Our factory can assemble various driving devices according to customer requirements.
3. If the customer needs to customize a special valve, the meaning and requirements of the model should be correctly explained, and the contract should be signed under the conditions that the supplier and the buyer understand the same.
4. For futures and order customers, please call us and tell us the required valve model, specification, quantity, delivery time and location in detail. And prepay 50% of the total contract amount for the preparation of production materials.
QQ客服 