FX-Z45X-10/160 Soft seal gate valve is produced by the company's imported high-quality rubber and door manufacturing technology, which overcomes the shortcomings of rubber aging and easy rusting of the core.
Material and description of main parts of soft seal Gate Valve |
|||||
Part Name |
Material name |
Material designation |
Part Name |
Material name |
Material designation |
Valve body |
Ductile iron |
QT450-10 |
Thrust bearing |
plastic |
DOM |
Valve plate |
Ductile Iron Coated Rubber |
QT450-10+EPDM or NBR |
Copper nut |
brass |
HPb59-1 |
Handwheel, square tube |
Ductile iron |
QT450-10 |
Sealing washer |
rubber |
NBR or EPDM |
Valve cap |
Ductile iron |
QT450-10 |
Bolt screw |
stainless steel |
316 or 304 |
Gland |
Ductile iron |
QT450-10 |
Screw washer |
stainless steel |
304 |
Valve stem |
Stainless steel rod |
2Cr13 |
Appearance painting |
Epoxy resin |
|
Lengthen the operating lever |
stainless steel |
2Cr13 |
|
|
|
The main structure size of FX-Z45X-10/160 Soft seal gate valve unit mm
Design standard for main technical parameters: GBT24924
Nominal diameter; 50-1000mm
Product structure characteristics
1) Pingting style: One is often after the flushing pipe is flushed with water, and foreign objects such as water, iron and other debris accumulate on the bottom of the door.
Inner, it is easy to cause water phenomenon that cannot be closed on the sealing surface. The elastic sealing round bottom adopts the same flat bottom design as the tube.
It is not easy to cause debris accumulation, so that the flow of liquid is unimpeded
2) Light weight: The body is made of ductile iron (QT450) film technology, and the weight is 20%-30% less than the weight of the word.
Convenient decoration
3) Precision casting body: the body is densely cast by the membrane process, and the precise geometric ruler makes the interior of the garden body without any processing to ensure Door seal
4) Integral core injection.
5) The board adopts high-quality glue injection inside and outside the body. The advanced rubber vulcanization and glue injection technology enables the vulcanized round board to ensure accurate geometric dimensions and the rubber and ductile iron plate are attached to each other, so that they are not easy to fall off.
6) Three-ring seal circle: Because the rod and the three-channel seal circle seal design, it can reduce the resistance when switching. Significantly reduce water leakage and can replace the sealing ring without stopping the medium flow in the pipeline
7) Not easy to crack: In the past, gray iron was used for traditional low pressure, which often caused breakage due to the push or heavy pressure of the foreign material. Because the valve body was made of ductile iron
These situations can be greatly reduced
8) Conducive to raw drinking: Since the inside of the valve body is coated with non-toxic epoxy resin, the inner and outer surfaces of the valve plate are safely covered with rubber to prevent molten iron or corrosion, which can be used for raw drinking
1. If the customer has special requirements for the product, the following instructions must be provided in the order contract:
(a).Structure length; (b) Connection Type; (c) Nominal diameter;
(d) Product use medium and temperature and pressure range;
(e) Test, inspection standards and other requirements.
2. Our factory can assemble various driving devices according to customer requirements.
3. If the customer needs to customize a special valve, the meaning and requirements of the model should be correctly explained, and the contract should be signed under the conditions that the supplier and the buyer understand the same.
4. For futures and order customers, please call us and tell us the required valve model, specification, quantity, delivery time and location in detail. And prepay 50% of the total contract amount for the preparation of production materials.