FX-F745X remote control float valve: Automatic control without manual operation;With slow opening and closing function, eliminate water hammer. The inner parts of the valve are made of carbon steel or stainless steel, and the valve body is coated with epoxy resin powder, which will not pollute the medium. Long service life and convenient maintenance.
Material of main parts
1 Valve cover: gray cast iron, ductile iron
2 Cylinder liner: stainless steel
3 Piston: ductile iron
4 Sealing ring: nitrile rubber, EPDM
5 Stem: 2Cr13
6 Spring: spring steel, stainless steel
7 Valve disc: ductile iron
8 Sealing gasket: Nitrile rubber, EPDM rubber
9 Valve seat: stainless steel
10 Sealing plate: Nodular cast iron
11 Valve body: cast iron, ductile iron
Main structure size of FX-F745X Remote Control Float Valve unit:mm
The main technical parameters of FX-F745X remote control float valve
Nominal pressure: 1.0/1.6MPa
Shell test: 1.5/2.4MPa
Seal test: 1.1/1.76MPA
Working temperature: 0℃ -80℃
Applicable medium: water and other second-class medium
Structural features
Hydraulic Control Valves are generally divided into two categories: diaphragm type and piston type. The working principle of the two is the same. It is composed of a main valve and its external needle valve, pilot valve, conduit and pressure gauge, etc., and evolved into a remote control float valve, pressure reducing valve, and relief valve according to the different purposes, functions and places. Pressure Valve, slow closing Check Valve, Flow Control Valve, fixed water level valve, emergency shut-off valve, electric control valve and water pump control valve, etc.
1. If the customer has special requirements for the product, the following instructions must be provided in the order contract:
(a).Structure length; (b) Connection Type; (c) Nominal diameter;
(d) Product use medium and temperature and pressure range;
(e) Test, inspection standards and other requirements.
2. Our factory can assemble various driving devices according to customer requirements.
3. If the customer needs to customize a special valve, the meaning and requirements of the model should be correctly explained, and the contract should be signed under the conditions that the supplier and the buyer understand the same.
4. For futures and order customers, please call us and tell us the required valve model, specification, quantity, delivery time and location in detail. And prepay 50% of the total contract amount for the preparation of production materials.
QQ客服 